{"id":1633,"date":"2025-12-30T23:01:11","date_gmt":"2025-12-30T23:01:11","guid":{"rendered":"https:\/\/wordpress.hertell.nu\/?p=1633"},"modified":"2026-01-02T09:34:17","modified_gmt":"2026-01-02T09:34:17","slug":"installing-wb-3-2-from-iso-image-in-uae","status":"publish","type":"post","link":"https:\/\/wordpress.hertell.nu\/?p=1633","title":{"rendered":"Installing WB 3.2 from ISO image in UAE."},"content":{"rendered":"\n

Time to do a guide how to install WB 3.2 with all updates with the general idea of be able to use it on a real machine. but all prep done from UAE.<\/p>\n\n\n\n

I will recommend you to read my guide how to use a image \/ physical disk in UAE first: https:\/\/wordpress.hertell.nu\/?p=1585<\/a> As I will actually install this on the SD Card I prepped in that guide here.<\/p>\n\n\n\n

As I want to install it on my SD Card I Start WinUAE as Admin.<\/p>\n\n\n\n

Go to “Quickstart” and select the amiga model that fits you. I will use this on an A1200. so Choose A1200.
(ok on the nagscreen about kickstart)
Now to CPU and FPU.
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I will use this with a 68060. but for the moment I will choose 68030 here and “Fastest possible”<\/p>\n\n\n\n

Click on “ROM” here actually I find the “ROMs” dir from Update 3.2.3 and choose A1200.47.115.rom file<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

RAM I set Z3 Fast to 32MB or so.
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

then CD & Hard drives I chose add Hard Drive.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

But you can choose anything else if you want to. but I select my RDB disk above. as that is the SD card I prepped before.

BUT! this time i Change it to a “Commodore A600\/A1200\/A4000 IDE”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I also click “Add SCSI\/IDE CD Drive”
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and choose Commodore A600\/A1200\/A4000 UDE aswell and Unit 1<\/p>\n\n\n\n

Add CD Drive<\/p>\n\n\n\n

at “CD drive\/image” I select my .ISO file for 3.2
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and Finally I go to “Floppy drives”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Where I select DF0 as the install disk. also set floppy emulation speed to Turbo.
NOW you can go to “Start” and start the Amiga emulation<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

So it started. here we can see my “WB” SD card I formatted before.<\/p>\n\n\n\n

We need to change settings of where the CD is. so Doubleclick “Install3.2” then “Storage” and then “Dosdrivers” click on the “CD0” icon once and hold down right mousebutton and choose “Icons” and “Information” in the menu.

<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click on “UNIT=2” and Change it to 1<\/p>\n\n\n\n

and “Save”<\/p>\n\n\n\n

Now Doubleclick on “ActivateCDROM”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Press Return.<\/p>\n\n\n\n

if you now close windows you will see the CD pop up:<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on it<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

And Doubleclick “Install”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on “StartHere”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Press “OK”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doublecklick on the “Install3.2” icon. it looks like the icon you clicked on before. but do not care. click on “Install”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n

Choose Language, I choose “English”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click “Proceed”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click “Install Release 3.2” and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I choose “Intermediate User” and Proceed with Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Let everything be as is. and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

This is fine so “Yes”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

as I am in Sweden I add “Svenska” and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I let all printers be here so “Proceed”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I let all keyboard layouts be here aswell so Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I will choose “no” I will add this later!<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and so it installs<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Just some info.. Just read it and “Proceed” we will handle this soon!<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

so all done! Proceed<\/p>\n\n\n\n

Now press “F12” in uae, Floppy drives and eject the install disk.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

OK and reset the amiga. (CTRL+Windows+Windows)<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

yes! we know. RETURN.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

hold down right mousebutton. go up in the menu and Woirkbench and tick “Backdrop”<\/p>\n\n\n\n

then again hold down right mousebutton go to the menu and choose “Window” – “Snapshot” “All”<\/p>\n\n\n\n

to let the WB be in the backdrop instead of a Window.<\/p>\n\n\n\n

INSTALL MMULIB<\/strong>
MMU Lib is software to patch bugfixes in the CPU that is found out later. most users might not notice them but. it is good to have it done.
it is also REQUIRED on higher CPUs like 68040 and 68060 for a stable usage:<\/p>\n\n\n\n

Now for MMULib and I want to use the newest version: https:\/\/aminet.net\/package\/util\/libs\/MMULib<\/a>

(I Actually google MMULib amiga and download it)<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

As I got 7-Zip installed on my Windows PC I can extract the .lha file directly. so I do this.<\/p>\n\n\n\n

This means I now have a directory: C:\\Users\\John\\Downloads\\data\\MMULib
lets add this as a temporary HD in uae:<\/p>\n\n\n\n

in UAE press F12<\/p>\n\n\n\n

CD & Hard drives<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Add Directory or Archive
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Enter the path to the dir. I let the others be empty. WinUAE will handle this. and “OK”.
YOU CAN also use the .lha file directly as I did in the prep-guide. this is just to also show you can use a directory on your PC aswell. both works as well.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and press “OK”<\/p>\n\n\n\n

Now reset your Amiga again. and press return at message.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on “MMULib”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

make Window larger and Doubleclick “MMULib”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

“Install”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and “install”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I Choose “Expert User” and “Proceed with Install”. Sadly this WILL mean that you will get a LOT of questions but I want to have that control!<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I let it install in SYS: (the boot drive) and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I choose “Skip” as this is a clean install.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Read and\/or close the window.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

As I will use a TF1260. I answer “No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Again “No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

“No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

“Yes”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Here i choose all CPUs I “might” use on my Machine.<\/p>\n\n\n\n

and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

As I am not using a BPPC. I Answer “No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Same here “No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Default values is good for most! but I want em all! so Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes! I want to do this as it makes kickstart way much faster. so “Yes”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Again “Yes”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

and “Yes”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

As I will not use ShapeShifter. I use “No”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

ok apparently not needed \ud83d\ude42 so Return (This might be due to 3.2 so earlier might need it)<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No (IF using 3.1 YES!)<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

no<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

No<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed!<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

Reboot your machine. it will now start without complaints.<\/p>\n\n\n\n

IF you get:
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n

You forgot to set “MMU” in the CPU setting.
You can now even set to 060:
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

And having “Unimplemented FPU emu” NOT checked. WinUAE own “internal” 060 lib is bypassed and it will now use MMULib instead. so you can see if it will work on your 060 machine.<\/p>\n\n\n\n

(Changing CPU will make machine crash so you need to reboot)<\/p>\n\n\n\n

Start a CLI and write “CPU”
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

you shold get 060 and with FPU then you know MMULib is installed.<\/p>\n\n\n\n

OK! GOOD Finally! lets patch to newest version of 3.2.3<\/p>\n\n\n\n

THAT above is not really needed! just to see especially if you will use a 060!. for a 060 this is REQUIRED<\/strong><\/p>\n\n\n\n

in WinUAE press F12<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Floppy Drives, select the ADF for Update 3.2.2. and press OK<\/p>\n\n\n\n

<\/p>\n\n\n\n

IMPORTANT NOTE!<\/strong>
APPARENTLY.. \ud83d\ude42 you can actually go directly to Update 3.2.3 witghout those steps below. but I include them for archive-reasons only. skip to “UPDATE 3.2.3” directly.<\/p>\n\n\n\n

Doubleclick on: <\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Install. And choose Language<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Novice, and Proceed With Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I choose “Svenska” aswell and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Press on F12 and choose the Classes disk. and press OK.<\/p>\n\n\n\n

It will continue. now do this for all disks it will ask for.<\/p>\n\n\n\n

After a while:
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Press Proceed<\/p>\n\n\n\n

it wil now boot again.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

F12 and Floppy Drives. select the 3.2.2.1 update ADF. and OK<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on Update 3.2.2.1<\/p>\n\n\n\n

Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Choose Language<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Novice User and Proceed With Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed and it restarts<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

UPDATE 3.2.3<\/strong><\/p>\n\n\n\n

F12, Floppy Drives and choose te Update 3.2.3 file in the ADFs dir.
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

OK<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on Update3.2.3.<\/p>\n\n\n\n

Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Choose Language<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Novice User and Proceed With Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Choose Languages and Proceed<\/p>\n\n\n\n

and do the F12 dance with all disks wanted.<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed and it reboots<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

FINALLY! 3.2.3!<\/p>\n\n\n\n

For Swedish (or any other country\/language) go to your Workbench.<\/p>\n\n\n\n

Prefs<\/p>\n\n\n\n

Input<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Set keyboard you want. Mouse Acceleration. Save<\/p>\n\n\n\n

<\/p>\n\n\n\n

Locale<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Set to what fits your setup. and Save<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Swedish \ud83d\ude42 ( I Switch back to english here for the guide)<\/p>\n\n\n\n

you can now move your SD card or whatever to your physical machine and it will run.<\/p>\n\n\n\n

THIS REQUIRES that you have the newest ROMS installed! if not. you will have to use the modules disks and install whatever is needed. outside the scope of this guide!<\/p>\n\n\n\n


Install GlowIcons<\/strong><\/p>\n\n\n\n

New Icons? ok GlowIcons are nice. BUT remember this consumes chipmem and requires quite many colors on screen. so I would only recomend this on a system with RTG:<\/p>\n\n\n\n

First we need to let the CD be available again. Doubleclick WB, Storage, Dosdrivers, click once on CD0<\/p>\n\n\n\n

hold right mousebutton -> Icons -> Information<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click “Icon” Tab<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Change Unit to 1 and Save<\/p>\n\n\n\n

Doubleclick on “CD0”<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Doubleclick on it<\/p>\n\n\n\n

Install<\/p>\n\n\n\n

Start Here.<\/p>\n\n\n\n

Close all Windows <\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click on that<\/p>\n\n\n\n

Install<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Choose Language<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Choose “Install GlowIcons” and Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Yes<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Click on Proceed<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

Install TFTools to be able to use TF1260: (for TF4060 this can be skipped as all this is in ROM!)<\/strong>
this is an EXTRA thing IF you have a TF1260 card! NOT required for other boards.<\/p>\n\n\n\n

(and not “really” required unless you want to be able to overclock etc)<\/p>\n\n\n\n

<\/p>\n\n\n\n

Go to the TF1260 Supportpage:
http:\/\/tf1260.com\/<\/a>

at the top you will see a link to newest firmware and tools.
http:\/\/wordpress.hertell.nu\/files\/tf1260r1_2023_05_19_a47c463_68090.zip<\/a> is what it is at the moment.
you must have same tftools as version of firmware!!<\/p>\n\n\n\n

RIGHT click on this link above and Save link as. and it will download<\/p>\n\n\n\n

I copy it to the dir where I unpacked MMULib as “I am lazy” and unzip it there<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

I also Unzip the “tftools” dir<\/p>\n\n\n\n

now go to the amiga. check the mmulib icon that will still be there<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

Hold right mousebutton down and go to menu: Window->Show -> Show All files now you can see all files.<\/p>\n\n\n\n

but. lets do it more “easy” close all windows.<\/p>\n\n\n\n

WB -> System -> Shell<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n

Write mmulib:tf1260r1_2023_05_19_a47c463_68090<\/p>\n\n\n\n

(you can just write mmulib:tf and press the TAB key and it will fill in the rest) and Return<\/p>\n\n\n\n

now write tftools_2023_05_19 (or just tftool and press TAB) and Return<\/p>\n\n\n\n

write dir<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

good lets “install” it just copy it to C:
<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

with Copy #? c:<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

now you have that installed.<\/p>\n\n\n\n

if you want ehide to load aswell<\/p>\n\n\n\n

Write \/ and press return.<\/p>\n\n\n\n

ehide<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n

Copy ehide.device devs: will copy it to your HDD.<\/p>\n\n\n\n

if you want it to be loaded at bootup. I do this by having a separate disk on my internal drive. having this among first things. it will boot. load ehide and reset and then as my IDE disk i have on my TF 1260 have higher prio. it will boot on that instead.<\/p>\n\n\n\n

so do : ed S:Startup-Sequence<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n

press Return to add a line and fill in:<\/p>\n\n\n\n

LoadModule >NIL: devs:ehide.device<\/p>\n\n\n\n

\"\"<\/a><\/figure>\n\n\n\n

save with ESC x and Return<\/p>\n\n\n\n

if you now reset. it will restart with a extra restart ONCE. this is when it loads ehide.device into memory.<\/p>\n\n\n\n

all done! Booting on your physical machine in cli you can now change cpuspeed with:<\/p>\n\n\n\n

cpuspeed speed 100<\/p>\n\n\n\n

to get 100Mhz (if your combo handles it)<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n


<\/p>\n","protected":false},"excerpt":{"rendered":"

Time to do a guide how to install WB 3.2 with all updates with the general idea of be able…<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1633","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/posts\/1633","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1633"}],"version-history":[{"count":3,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/posts\/1633\/revisions"}],"predecessor-version":[{"id":1828,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=\/wp\/v2\/posts\/1633\/revisions\/1828"}],"wp:attachment":[{"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1633"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1633"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wordpress.hertell.nu\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1633"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}