![\"UAEQuickstart\"](\"http:\/\/wordpress.hertell.nu\/wp-content\/uploads\/2019\/11\/UAEQuickstart.jpg\")
<\/a><\/p>\nin Quickstart , Here select model. I choose A1200<\/p>\n
At CPU I select 020, but I also tick “Fastest Possible” as I am not interested of any cycle-extact things here. I want to have speed.<\/p>\n Next step is ROM.\u00a0 I select a 3.1 rom for the 1200.\u00a0 i will NOT provide it to you..\u00a0 but\u00a0 hint.\u00a0 you CAN from an real amiga dump the data from $f80000 and 512K from that and use that file.. \ud83d\ude09<\/p>\n Then at RAM I add Z2 memory.\u00a0 it is not really needed. but. hey!\u00a0 it is “free”<\/p>\n Time to point to the floppy. I select the install disk for 3.1 and also set speed to Turbo.<\/p>\n Time for HD.\u00a0 Click on “Add Directory or archive”<\/p>\n Here use devicename HDD and what you want it to be called. and a directory where to put the files. Anyway clicking OK and it will look like the picture above with HDD dir.<\/p>\n Now to config.\u00a0 your list wil be shorter.\u00a0 as this is my testbench etc I got lots of configs. But in “name” enter some name. I took SmallSetup.<\/p>\n and Save the config<\/p>\n now click “Start” and the Amiga will boot to the install disk:<\/p>\n so double-click on Install3.1:<\/p>\n and on “Install”<\/p>\n Select language.\u00a0 I use English:<\/p>\n And you will see the installer:<\/p>\n Press “Proceed”<\/p>\n and press “Install Release 3.1”<\/p>\n and you will be presented:<\/p>\n Here stick to Novice user.\u00a0 it is ok for us now.<\/p>\n Select languages you want. and “Proceed”<\/p>\n I do not care about printers. so Proceed.<\/p>\n Choose keyboards you want to install.\u00a0 as my keyboard is Swedisg I click it.\u00a0 And proceed<\/p>\n When this pops up.\u00a0 press F12 on your keyboard:<\/p>\n And select the WB disk and OK<\/p>\n after a short time, it will automatically go to next step:<\/p>\n Well same here..\u00a0 F12..\u00a0 etc<\/p>\n I will just repeat all screens here:<\/p>\n So this is done.\u00a0 now time to eject the disk. or it will be booted.<\/p>\n press F12<\/p>\n <\/p>\n and click “eject” on df0.<\/p>\n DO also save this config. so it will not boot from disk the next time.. press start<\/p>\n then in UAE on the Amiga. press “Proceed”<\/p>\n And it will boot. (here you can see the installdisk. you will not. as you ejected it \ud83d\ude42 )<\/p>\n anyway.\u00a0 now exit UAE with ALT+F4<\/p>\n OK. now it is time to to the physical amigastuff..<\/p>\n if you DO have a real HD that have been formatted on an amiga. you can skip this part.\u00a0 and go to the “Setup disk in WinUAE” later.<\/p>\n OK you have a HD, CF, SD, SCSI disk?\u00a0 attach it to some kind of adapter to your PC.\u00a0 \u00a0 Somewhat wrong I will use a USB stick here, even if it will not physically work on an amiga. the handling is the exact same thing:<\/p>\n a device with ANY kind of partitiondata windows can find. it WILL block WinUAE. you MUST clear stuff. so to do so. Start a “CMD” as admin:<\/p>\n press the windows\/start button and just type “cmd” and it will show you some results:<\/p>\n when you see “Command promt” RIGHTclick on it and “Run as administrator”<\/p>\n if you have UAC enabled (AS YOU SHOULD!) you will get a yes\/no question every time. answer YES..<\/p>\n at the DOS promt write\u00a0 diskpart and press enter<\/p>\n You will now see:<\/p>\n now you want to list the disks on your system:<\/p>\n Here you can see that I got 2 disks.<\/p>\n and disk 1 is my device I want to use on the Amiga (noted by the SIZE!)<\/p>\n lets select it:<\/p>\n just write Select disk 1.\u00a0 remember to use the correct number for YOUR system. do something wrong and you WILL screw up your system. and do NOT blame me!<\/p>\n by writing Clear and press enter. it will clear ALL data on this disk. no questions. it will do it.\u00a0 wrong disk and you WILL be sorry!<\/p>\n you can now close this.\u00a0 and you will notice that windows will not recognise the device anymore<\/p>\n <\/p>\n Setup disk in WinUAE<\/strong><\/p>\n THIS is where you need to jump to of you have a Amigadevice already that doesn’t need to be cleared on a PC<\/p>\n Time to start WinUAE. but you NEED to do this as admin.\u00a0 FORGET all old REMOVED commandlines to winuae. it WILL NOT WORK.<\/p>\n rightclick on the WinUAE icon:<\/p>\n and choose “Run as administrator”\u00a0 and choose YES on a UAC request..<\/p>\n Load your config you saved<\/p>\n and go to:<\/p>\n <\/p>\n CD & Hard drives<\/p>\n Press “Add hard Drive”<\/p>\n You will see a drop down list. here you can see the device as [UNK]\u00a0 if it is a real amiga device it will read [RDB] instead.<\/p>\n choose it and “Add hard drive”<\/p>\n yeah! right stuff\u00a0 Add hard drive<\/p>\n now Start UAE and let the WB boot<\/p>\n (IF you didn’t save the config after removing the install floppy. remove that floppy now BEFORE boot)<\/p>\n It is booted. Time to partition the drive (IF you have a amigadrive mounted. it will be presented here. but now we act as it isn’t!)<\/p>\n Doubleclick UAEDisk<\/p>\n and doubleclick Tools<\/p>\n you might need to resize the window.<\/p>\n but click once on HdToolbox and the hold down right mousebutton to get into the menus.<\/p>\n Go to Icons\/Information and release the mousebutton:<\/p>\n Click on the SCSI_DEVICE_NAME line.<\/p>\n at the window below. change scsi.device to uaehf.device and press enter<\/p>\n press Save<\/p>\n and now doubleclick on Hdtoobox<\/p>\n it wil now show some devices.\u00a0 might be unknown or known. usually it is the device at the bottom so click it<\/p>\n and Change Drive Type<\/p>\n here we had not handled any drives. it might be different for you.\u00a0 anyway. “Define new”<\/p>\n now it is time to read the data..\u00a0 press “Read configuration” and it will read the physical data from the device<\/p>\n it will warn you some. yeayheay.\u00a0 press Continue<\/p>\n Here you can see that it is the correct drive.\u00a0 if not\u00a0 cancel and select another drive<\/p>\n if it is all OK press OK<\/p>\n Press OK here aswell it wil save this data<\/p>\n you MIGHT get this nag.\u00a0 bah! Continue. I will not use old OSes anyway<\/p>\n press Partition Drive:<\/p>\n This might look different for you. but resize the FIRST parition to BELOW 2GB!<\/p>\n Also press “advanced options”\u00a0 change partition drive name to DH0 (or whatever you want) make sure Bootable is ticked.<\/p>\n in this tutorial I will NOT change filesystems etc.\u00a0 we keep it simple!)<\/p>\n now click on the other parition (OR paritions if you got a large disk) and delete all the others<\/p>\n we let the rest be unused. press OK<\/p>\n press “Save changes to drive”<\/p>\n <\/p>\n it will now be greyed out. press exit<\/p>\n here you might get different results.\u00a0 warning about parititons changed, it will reboot etc etc. it is ok<\/p>\n if no reboot. DO reboot with ctrl+windows+windows<\/p>\n the drive will pop up after like 1 second or so as NDOS etc.<\/p>\n click it and then hold right mousebutton:<\/p>\n go to Icons and Format disk<\/p>\n Write a name and choose QUICK FORMAT (it is pointless doing “format” or so. do it QUICK!)<\/p>\n are you SURE? press format<\/p>\n Are you REALLY sure?\u00a0 press format<\/p>\n formatting drive<\/p>\n and:<\/p>\n yeah disk is formatted<\/p>\n go to UaeDisk (or the UAE disk you did) (doubleclick on it)<\/p>\n Doubleclick on System<\/p>\n Start CLI (or well.\u00a0 Shell!)<\/p>\n Resize and move it to a good size and write\u00a0 \u00a0info and press enter<\/p>\n here you can see that the PC hd is named “HDD:”\u00a0 and the Amiga is named “DH0:” now time to copy from the PC to Amiga:<\/p>\n simply write\u00a0 \u00a0 \u00a0 \u00a0 copy hdd: dh0: all clone\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 this copies ALL from HDD: to DH0:\u00a0 and will clone all tags etc.\u00a0 \u00a0 if you also enter quiet\u00a0 after it will not show anything making copy faster.<\/p>\n <\/p>\n <\/p>\n it copy data..<\/p>\n <\/p>\n <\/p>\n and now it is DONE.<\/p>\n now press F12<\/p>\n click on “HDD” and choose “remove”<\/p>\n do however not save this..\u00a0 this is just to let WinUAE to only know of the physical Amiga disk you have left.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n
\nNO I do not use DH0 here as I want that to be used on the amigaside later.\u00a0 AND I do not use a HDF file etc. as by this method I can ZIP the installation from the pc and send to someone, backup or whatever. I haven’t found any drawback to use this.<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n
\n(to be honest. I happened to do this during my screenshot test \ud83d\ude42 )<\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n